Professional Attic Insulation Services in the GTA

Before installing new insulation, we inspect the attic for openings, gaps, penetrations, and other areas where heated or conditioned air may escape from the living space into the attic.

Where appropriate, these areas are sealed using spray foam or other suitable air-sealing materials. Particular attention is given to common leakage points, including plumbing and electrical penetrations, wiring openings, framing gaps, attic penetrations, and other accessible openings between the conditioned living space and attic.

We also inspect accessible light fixtures, exhaust fans, and other ceiling penetrations and seal them using appropriate methods while maintaining required clearances and safety requirements.

Proper attic ventilation is equally important. Existing ventilation pathways are inspected, and new attic baffles are installed where required. Baffles help maintain a clear ventilation channel at the soffits so outside air can move properly through the attic without the new insulation blocking airflow.

This combination of air sealing and ventilation preparation helps reduce unwanted heat loss, drafts, and air movement while allowing the attic ventilation system to function correctly.

Once the attic has been properly prepared, we install new blown-in cellulose insulation.

The cellulose is evenly distributed throughout the designated attic area to achieve the required installed depth and thermal resistance. Special attention is given to maintaining consistent coverage and minimizing low spots or areas where insufficient insulation could reduce overall performance.

The insulation is installed to achieve an R-60 thermal resistance level, subject to applicable building-code requirements, product specifications, attic conditions, and required clearances.

Care is also taken around ventilation areas, attic access points, fixtures, mechanical equipment, and other components so that insulation does not interfere with required ventilation or safe operation.

The result is a properly insulated attic designed to significantly reduce heat transfer between the home and attic space.

After installation, we perform a final inspection of the completed work.

We verify that the insulation has been installed to the required coverage and depth, ventilation pathways remain unobstructed, and the areas included in the scope of work have been properly completed.

Any required finishing details are addressed before the project is considered complete.

Upon satisfactory completion, the homeowner is provided with applicable documentation or certification confirming the attic insulation work performed, including the insulation level achieved where applicable.

The final step is a walkthrough with the homeowner.

We review the completed work and explain the improvements that were made to the attic, including insulation, air sealing, and ventilation work included in the project.

We also discuss recommended attic maintenance and important considerations for future work. For example, homeowners should be aware that future electrical, plumbing, HVAC, roofing, or renovation work in the attic can disturb insulation or affect air sealing and ventilation.

Finally, we review the applicable product and workmanship warranties, explain what is covered, and answer any questions the homeowner may have.

Our goal is to leave every client with a clear understanding of the work completed, how their upgraded attic insulation system functions, and how to maintain its performance for years to come.